Translations:Preparing Hardware/45/en

From meteoplug
Jump to: navigation, search

Flashing Meteobridge Firmware

Having done the steps mentioned before (setting up your own TFTP server or using a virtual machine image) you are ready to actually flash the Meteobridge firmware onto the MR3020v3.

  1. Connect the MR3020v3 with an Ethernet cable to the same LAN your TFTP server is in.
  2. Press the large button on the top of the MR3020v3 and keep it pressed.
  3. Connect the MR3020 to power while you keep the button pressed.
  4. Wait 15 seconds an then release the button.
Retrieved from "https://wiki.meteoplug.com/wiki/index.php?title=Translations:Preparing_Hardware/45/en&oldid=6995"