View source for Push Services/de

__NOTOC__
<languages /><br />Meteobridge stellt eine reihe von individualisierbaren Sendedienste zur Verfügung, die auf verschiedene Arten Wetterdaten an andere Systeme weiterleiten können. Zu den Standardmethoden gehört der zeitgesteuerte Versand von E-Mails und Twitter-Nachrichten mit aktuellen Wetterdaten sowie eine Alarmierungsfunktion, die beim Erreichen individuelle definierbarer Schwellwerte Meldungen per E-Mail oder Twitter versendet. 

Wenn der "Expertenmodus" ausgewählt und mit "Speichern" bestätigt wurde, stehen weitere, etwas komplexere Übertragunsmodi zur Verfügung. Bei Ausschalten diese Option verschwinden diese Dienste wieder vond er Seite, die sonst recht überladen wäre.

Die folgenden Abschnitte erläutern wie die Sendedienste im Detail aufgesetz werden. Die Sendedienste sind eher für den technisch versierten Anwender interessant, da man ein Grundverständis über die Funktionsweise dieser Dienste benötigt. Wenn man nur Wetterdaten an vordefinierte Wetternetzwerke übertragen möchte, sollte man diesen Reiter komplett ignorieren. 

==Basic Push Services==
We 'll start with three basic push services that can send weather data an a regular schedule or triggered by events to your email address or twitter account.


[[File:page6.png]]


===Twitter Upload===
Meteobridge allows you to send weather data snippets to your twitter account. As twitter requires a bit complicated authentication you will have to run through 6 steps.

<gallery perrow=1 widths=500 heigths=350>
File:twitter0.png|1. Press "Request PIN" button.
File:twitter2.png|2. An additional window will pop-up (please make sure your browser's pop-up blocker does not block it!) where twitter asks you to log-in to your twitter account. 
File:twitter2b.png|3. Please log-in and copy the pin that twitter does present to you.
File:twitter4.png|4. Switch back to Meteobridge page and Insert pin into input field next to "Activate PIN" button and press this button.
File:twitter3.png|5. Finally, insert message text that Meteobridge should tweet and set upload interval and retry count and press save to make these settings permanent. If Authentification with twitter does fail, you can start process with pressing "Request new PIN" from the start. 
File:twitter5.png|6. To fill message text with weather data and/or a timestamp, you can make use of Meteobridge variables as explained in [[Templates]] section. Example above is a result of this message text: <font face="Courier"><span style="background-color:lightgrey;">[hh]:[mm]h Outdoor temp: [th0temp-act=F.1:--]°F </span></font face>
</gallery>


===Individual E-mail Service===
Meteobridge can send you customizable e-mails at certain time intervals. To get this service started you have to work through the following settings 
* '''Send Interval''': defines how often the e-mail should be sent. If you don't want to send weather data on regular schedule but want to send e-mails just on alarm conditions, set this to "on alarm only". Drop-down box next to this on the right allows you to choose how many e-mail send retries should be done in case e-mail sending does fail. Next drop-down box allows you to defne how authorization of the SMTP server that transports the e-mail into the Internet should be done. You choose between:
** none: This setting does not ive any authentication information to the SMTP server. Only servers in closed LANs will provide that (if at all).
** basic: Old-fashioned user name and password authentication, without SSL encryption
** tls: authentication with SSL encryption (a variant not used very often)
** starttls: standard authentication with SSL encryption (most often used)
* '''SMTP Host''': specifies the IP or name of the SMTP server to use.
* '''Port''': port number where SMTP server listens for mails (standard ports are 25 for non-SSL and 587 for SSL communication)
* '''User''': user name to be used for authentication
* '''Password''': password to be used
* '''To-Addr.''': E-mail address of the recipient
* '''From-Addr.''': E-mail address of the sender (many SMTP servers only accept mails with a sender address being in the same domain as the SMTP server itself)
* '''Body''': This contains the text to be sent via email. You can use a '#' sign to separate the subject from the boday of the mail. This string is subject to template replacement and therefore does allow you to use Meteobridge variables inside your e-mail.

The test button in the "SMTP Hoste" line does send an e-mail with subject "Meteobridge Test" to the given address. If sendig the mail does not work, an error message will pop-up, explaining what went wrong. 


[[File:email0.png]]


Body <font face="Courier"><span style="background-color:lightgrey;">weather conditions#temp [th0temp-act.1:--]°C\n[wind0wind-max60=kmh.1:--]km/h</span></font face> in example above generates an e-mail with subject "weather conditions" and a body containing two lines (separated by a line feed character "\n"). First line will report current outdoor temperature like "13.4°C" and second line will report max gust speed during last hour, like "34.7km/h". Details of using variables in templates are explained in [[Templates]] section.

===Alarm Service===
Meteobridge can send you an e-mail or twitter message when a certain sensor condition is met. To have this feature activated, as least on of the services "e-mail " or "twitter" must be configured correctly. Alarm services makes use of the e-mail and twitter settings and does not provide seperate credentials for these services.
The fields in the screen dump below have this meaning:
* '''Alarm Mode''': can be "disabled", "send e-mail" or "send twitter". In addition you can choose between "one-time alarms" which are triggered once and need to be cleared before they can be fired again, and "incremental alarms" which allow a retriggering of a non-cleared alarm, when the triggering event matches "raise condition" by a larger magnitude than the last trigger event.
* '''Raise Condition''': defines the condition to be met in order to fire an alarm. Once an alarm is fired, it will not be fired again until the alarm is cleared again. When you have selected incremental alarms, an alarm can be fired again under certain circumstances. Details on condition statements are explained in "conditions" subsection below.
* '''Clear Condition''': defines condition to be met to clear a fired alarm. Details on condition statements are explained in "conditions" subsection below.
* '''Message''': defines the email or twitter text to send. This text is subject to Meteobridge's template replacement mechanism and is handled as already lined out for e-mail and twitter services.

[[File:alarm0.png]]


Body <font face="Courier"><span style="background-color:lightgrey;">Gust Warning#Gust speed of [wind0wind-act=kmh.1:--]km/h</span></font face> in example above generates an e-mail with subject "Gust Warning" and a body containing a line like "Gust speed of 65.2km/h", when raise condition in example of gust speeds greater 50 km/h is met.

====Conditions====
There are two type of conditions that are formulated exactly the same way, but have different meaning. If a "raise condition" is satisfied, an alarm will be triggered and sent via e-mail or twitter. To send out the next email, it needs the "clear condition" to be satisfied first. The idea behind that is to suppress a large amount of follow-up messages on an event already given attention. For example, when raise condition is set to "outdoor temp above 35°C" and clear condition is set to "outdoor temp below 30 °C" and resolution used for comparison is integer level (zero decimals) you will get a message once the temperature goes beyond 35° but will not get additional messages on that until the temperature has dropped below 30°C again. When you habe selected "incremental alarms" and temperature raises from 35°C up to 37.2°C you will get one messages about passing 35°C, one about passing 36° and one about passing the 37°C threshold. This gives you the chance to get informed how much the given threshold was passed.   

Condition statements consist of three parts separated by blanks.

* First part is the '''variable'''. Variables in conditions are exactly the same as in Meteobridge [[Templates]], so you don't have to learn a new syntax here. While variables in templates are embedded into a pair of square brackets, variables in condition statements don't have that brackets. The raise condition in the example above has varibale definition <font face="Courier"><span style="background-color:lightgrey;">wind0wind-act=kmh.1:0</span></font face>, which stands for actual non averaged wind speed, converted to km/h with no decimals and when there is no sensor data there, then 0 is taken as speed.

* Second part is a '''comparison operator'''. Defined operators are 
** '''=''' equal, '''!=''' non equal 
** '''<''' less than, '''<=''' less than or equal
** '''>''' greater than, '''>=''' greater than or equal

* Third part is a '''numerical value''', which can be integer or float.


==Advanced Push Services==
When you select "Expert Mode" you have additional options to send weather data to. All these services need a server somewhere which can take data from your Meteobridge client. Supported protocols are HTTP-GET, mySQL and FTP. 


[[File:page6b.png]]


===Individual HTTP Upload===
Data will be sent as HTTP GET requests with URL parmeters you can define to your liking. Parameters of a URL consist of name-value pairs seperated by '&'. You can define names yourself and can use a certain set of variables provided by Meteobridge to be used as values. Variable names will be automatically replaced by their current values, each time a HTTP request is sent. Please have a look at the example below.


[[file:http-upload.png]]


Upload schedule is defined to every 10 seconds. URL specifies server address, where to deliver data ("http://myserver.com/upload.php" in the example above). "Success Condition" allows to specify a matching string which is compared to to the return message from the server to decide if upload was successful or not.

Weather data is transported to the server by means of URL parameters. Meteobridge provides a large set of variables that can be used to feed URL parameters with current sensor data. Section [[Templates]] will explain how to use these variables to fill URL parameters with recent sensor data.

===Individual MYSQL Uploads===
When you prefre to store your weather station's data in your own MYSQL database, Meteobridge can feed sensor data to it in a very easy way. Just state 
* '''Host''': server name or IP of server (when DNS can't resolve the name)
* '''Port''': port number where to reach MYSQL database on your server
* '''Database''': name of database to feed
* '''User''': name of database user to use for data upload
* '''Password''': password for user name.
* '''Query''': payload that should be sent to the database. Query usually contains a MSQL insert statement followed by a table name and a list of column names and values. The query ist subject to template replacement, so you can use Meteobridge variables to upload weather data to your database.


[[File:mysql.png]]


Query <font face="Courier"><span style="background-color:lightgrey;">insert upload (temp, wind) values ([th0temp-act.1:-9999], [wind0wind-act=kmh.1:-9999])</span></font face> in example above stores actual outdoor temperature to field "temp" of table "upload" of database "test". Field "wind" is filled with current non averaged wind speed in km/h. When temperature or wind data is not there a value of -9999 is stored.

Details of using variables in templates are explained in [[Templates]] section.

===Individual FTP Uploads===
Meteobridge allows you define a FTP server where it can upload up to 4 different files. FIles to be uploaded have to be accessable in the Internet via HTTP. Meteobridge downloads the files pointed to, replaces Meteobridge variables inside the downloaded file by current weather data and uploads resulting file to the specified directory. Meteobridge can just handle one FTP server, but distinct directories and file names for each of the four uploads. Setup of FTP upload credentials is done as follows:
* '''FTP Host''': server name or IP of server (when DNS can't resolve the name)
* '''Port''': port number where to reach MYSQL database on your server
* '''FTP User''': user name to be used for FTP upload
* '''FTP Password''': password to be used for FTP upload

In order to check if FTP credentials do work, you can press "Test Upload" button. Meteobridge will upload a file named "test-upload" with current time stamp as content to your FTP server. File will be located at directory that is default when doing FTP login. When you want to test upload to different directories you can specify an path in "Test Path" field. This path is used for test uploads only.

In oder to define the payload Meteobridge should upload in regular intervals you have 4 lines to select content. Each line specifies an upload schema determined by three input fields.
* Upload Interval: can have values from "no upload", "once per minute" up to "every hour".
* Template file: this specifies an URL where to find the template in the Internet that Meteobridge should download, fill in weather data and upload to FTP server.
* Path: defines the path where to store the data on the FTP server. Path includes directory and file name in Linux style (separated by "/"). Filename of the template is not used as default, you always have to specify a complete target file name.

To minimize traffic, Meteobridge does not download the referenced template files each time it does prepare a FTP upload. Templates are downloaded once during startup of Meteobridge and stay untouched until you press "Reload Templates" button. When you are working on the design of new templates, don't forget to press the reload button to make template changes effective to Meteobridge.


[[File:ftp.png]]


Example above defines an upload schema to FTP server "ftp.myfamousserver.com" for user "myself". Template [http://template.meteobridge.com/simpledash.html template.meteobridge.com/simpledash.html] has been loaded on start up of Meteobridge and will be updated with recent data every minute and then uploaded to FTP server as file "mydash.html". When you view "mydash.html" with your browser it looks like this:


[[File:mydash.png]]


Details of using variables in templates are explained in [[Templates]] section. 
To illustrate that using these varibales is quite easy the HTML body part (omitting the CSS styles for formating it nicely) of the template used in above's example is attached below:
<pre>
<body>
  <table id="table-2">
    <thead><tr><th>Sensor</th>
               <th>Current</th>
               <th>Today (min)</th>
               <th>Today (max)</th></tr></thead>
    <tbody>
      <tr><td>Outdoor Temperature</td>
          <td>[th0temp-act.1:--]&deg; C</td>
          <td>[th0temp-dmin.1:--]&deg; C</td>
          <td>[th0temp-dmax.1:--]&deg; C</td></tr>
      <tr><td>Outdoor Humidity</td>
          <td>[th0hum-act.0:--] %</td>
          <td>[th0hum-dmin.0:--] %</td>
          <td>[th0hum-dmax.0:--] %</td></tr>
      <tr><td>Outdoor Dew Point</td>
          <td>[th0dew-act.1:--]&deg; C</td>
          <td>[th0dew-dmin.1:--]&deg; C</td>
          <td>[th0dew-dmax.1:--]&deg; C</td></tr>
      <tr><td>Wind Chill Temperature</td>
          <td>[wind0chill-act.1:--]&deg; C</td>
          <td>[wind0chill-dmin.1:--]&deg; C</td>
          <td>[wind0chill-dmax.1:--]&deg; C</td></tr>
      <tr><td>Air Pressure</td>
          <td>[thb0seapress-act.1:--] hPa</td>
          <td>[thb0seapress-dmin.1:--] hPa</td>
          <td>[thb0seapress-dmax.1:--] hPa</td></tr>
      <tr><td>Wind Direction</td>
          <td>[wind0dir-act.0:--]&deg;</td>
          <td></td><td></td></tr>
      <tr><td>Wind Speed (averaged)</td>
          <td>[wind0avgwind-act.1:--] m/s</td>
          <td>[wind0avgwind-dmin.1:--] m/s</td>
          <td>[wind0avgwind-dmax.1:--] m/s</td></tr>
      <tr><td>Gust Speed</td>
          <td>[wind0wind-max5.1:--] m/s</td>
          <td>[wind0wind-dmin.1:--] m/s</td>
          <td>[wind0wind-dmax.1:--] m/s</td></tr>
      <tr><td>Rain</td>
          <td>rate: [rain0rate-act.1:--] mm/h</td>
          <td>sum [rain0total-sumday.1:--] mm</td>
          <td></td></tr>
      <tr><td>Solar Radiation</td>
          <td>[sol0rad-act.0:--] W/qm</td>
          <td>[sol0rad-dmin.0:--] W/qm</td>
          <td>[sol0rad-dmax.0:--] W/qm</td></tr>
      <tr><td>UV Index</td>
          <td>[uv0index-act.1:--] uvi</td>
          <td>[uv0index-dmin.1:--] uvi</td>
          <td>[uv0index-dmax.1:--] uvi</td></tr>
    </tbody>
  </table>
</body>
</pre>