Difference between revisions of "Translations:Templates/16/en"

==System Variables==
Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are: 
* '''mac''': Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
* '''swversion''': Meteobridge version string (example: "1.1")
* '''buildnum''': build number as integer (example: 1673)
* '''platform''': string that specifies hw platform (example: "TL-MR3020")
* '''station''': string that specifies selected weather station (example: "WMR-200")
* '''stationnum''': integer that specifies selected weather station (example: 49)
* '''language''': language used on Meteobridge's web interface (example: "English")
* '''timezone''': defined timezone (example: "Europe/Berlin")
* '''latitude''': latitude as float (example: 53.875120)
* '''longitude''': longitude as float (example: 9.885357)
* '''uptime''': uptime of Meteobridge in seconds
* '''cpuload1m''', '''cpuload5m''', '''cpuload15m''' shows average cpu load during last 1, 5, 15 minutes
* '''ip''': IP address
* '''lanip''': IP address on the LAN port (if connected)
* '''wlanip''': IP address of the WLAN (if connected)
* '''lastdata''': seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
* '''lastgooddata''': seconds passed since last piece of meaningful sensor data recorded, returns -1 if no sensor data recorded so far
* '''solarmax''': maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
* '''lunarage''': days passes since new moon as integer (example: 28)
* '''lunarpercent''': lunarphase given as percentage from 0% (new moon) to 100% (full moon)
* '''lunarsegment''': lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
* '''daylength''': length of day (example: "11:28")
* '''daylengthmin''': length of shortest day of the year
* '''daylengthmax''': length of longest day of the year
* '''civildaylength''': alternative method for day length computation (example: "12:38")
* '''civildaylengthmin''': length of shortest day of the year according to civil day length computation
* '''civildaylengthmax''': length of longest day of the year according to civil day length computation
* '''nauticaldaylength''': alternative method for day length computation (example: "14:00")
* '''nauticaldaylengthmin''': length of shortest day of the year according to nautical day length computation
* '''nauticaldaylengthmax''': length of longest day of the year according to nautical day length computation
* '''sunrise''': returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
* '''sunset''': returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
* '''civilsunrise''', '''civilsunset''', '''nauticalsunrise''', '''nauticalsunset''': alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
* '''daynightflag''': returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
* '''isday''': returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
* '''isnight''': returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
* '''moonrise''': time of moonrise in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
* '''moonset''': time of moonset in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
* '''graphA''': returns URL of the user's Meteoplug chart "*instruments-black"
* '''graphB''': returns URL of the user's Meteoplug chart "*instruments-black-imp"
* '''graphC''': returns URL of the user's Meteoplug chart "*iphone-black"
* '''graphD''': returns URL of the user's Meteoplug chart "*iphone-black-imp"
* '''graphE''': returns URL of the user's Meteoplug chart "*iphone-tw-2d"
* '''graphF''': returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
* '''graphG''': returns URL of the user's Meteoplug chart "*iphone-pr-2d"
* '''graphH''': returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"