Revision as of 22:59, 25 February 2013
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Templates )
==Sensors==
==Sensors==
These sensors are defined in Meteobridge.
* '''th0temp''': outdoor temperature in degrees Celsius
* '''th0hum''': relative outdoor humidity as percentage
* '''th0dew''': outdoor dew point in degrees Celsius
* '''th0heatindex''': outdoor heat index in degrees Celsius
* '''thb0temp''': indoor temperature in degrees Celsius
* '''thb0hum''': indoor humidity as percentage
* '''thb0dew''': indoor dewpoint in degrees Celsius
* '''thb0press''': station pressure in hPa
* '''thb0seapress''': normalized pressure (computed to sea level) in hPa
* '''wind0wind''': wind speed in m/s
* '''wind0avgwind''': average windspeed in m/s (time used for average depends on station)
* '''wind0dir''': wind direction in degress (0° is North)
* '''wind0chill''': wind chill temperature in degrees Celsius
* '''rain0rate''': rain rate in mm/h
* '''rain0total''': rain fall in mm
* '''uv0index''': uv index
* '''sol0rad''': solar radiation in W/m^2
* '''sol0evo''': evapotranspiration in mm (only supported on Davis Vantage stations)
* '''sun0total''': sunshine duration in hours (only supported on Davis Vantages equipped with a 3rd party sunshine detector)
* '''lgt0dist''': Distance to lightning in kilometer.
* '''lgt0energy''': Energy of lightning strike (no physical unit).
* '''lgt0total''': Number of lightning strokes.
If a sensor is not there or data of sensor has passed the "tolerated data age" interval, Meteobridge will not provide data for it and will present the value defined as "replacement". If no replacement is given, variable will not be converted into data but will stay as is.
As some weather stations do also report low battery status, there are also sensors '''thb0lowbat''', '''th0lowbat''', etc available. These sensors provide current low bat status (0 = no low battery, 1 = low battery) for each of the base sensors. Translation ==Sensoren== Sensoren Diese Sensoren sind in Meteobridge definiert:
th0temp : Außentemperatur in Grad Celsius
th0hum : Relative Außenluftfeuchte in Prozent
th0dew : Außentaupunkttemperatur in Grad Celsius
thb0temp : Innentemperatur in Grad Celsius
thb0hum : Innenluftfeuchte in Prozent
thb0dew : Innentaupunkttemperatur in Grad Celsius
thb0press : Stationsluftdruck in hPa
thb0seapress : auf Meeresspiegelhöhe berechneter Luftdruck in hPa
wind0wind : ungemittelte Windgeschindigkeit in m/s
wind0avgwind : gemittelte Windgeschindigkeit in m/s
wind0dir : Windrichtung in Grad (0° ist Norden)
wind0chill : Windchill-Temperatur in Grad Celsius
rain0rate : Regenrate in mm/h
rain0total : gefallene Regenmenge in mm
uv0index : UV-Index
sol0rad : Solarstrahlung in W/m^2 Wenn ein Sensor nicht existiert oder seine Daten älter als das maximal tolerierte Sensordatenalter sind, wird Meteohub keine Daten einsetzen und sofern definiert, stattdessen die Ersatzzeichenkette einsetzen. Falls keine Ersatzzeichenkette definiert ist, bleibt die Variable unersetzt als Zeichenkette stehen.
