Difference between revisions of "Translations:Templates/5/de"

Apart from selectors that use absolute, predefined time slots there are also selectors that look for a certain amount of time into the past.
* '''val1''', '''val1''', '''val3''', ..., '''val60''': selects the value the sensor has shown one to 60 minutes ago (This is only available for sensors with ID 0 and 1, like "th0temp" or "th1temp", unless you have a Meteobridge PRO).
* '''max1''', '''max2''', '''max3''', ..., '''max60''': selects the maximum value from the last one to 60 minutes
* '''min1''', '''min2''', '''min3''', ..., '''min60''': selects the minimum value from the last one to 60 minutes
* '''avg1''', '''avg2''', '''avg3''', ..., '''avg60''': selects average value from the last one to 60 minutes
For sensors delivering cumulated values like "rain0total" and "sol0evo" the following selectors are defined:
* '''sum1''', '''sum2''', '''sum3''', ..., '''sum60''', '''sum1h''', '''sum2h''', '''sum3h''', ..., '''sum24h''': selects summarized delta values from the last one to 60 minutes or one to 24 hours. This is useful to get amount of total rain in a certain time frame: "rain0total-sum60" is rainfall in mm of last 60 minutes.
* '''delta1''', '''delta2''', '''delta3''', ..., '''delta60''', '''delta1h''', '''delta2h''', '''delta3h''', ..., '''delta24h''': selects difference between current value and value from one to 60 minutes or one to 24 hours ago. A positive number shows that value has increased, a negative number indicates the value has decreased. This is useful to do trend analysis over various time spans.