Translations:Templates/21/en

Meteobridge PRO Additions

Selectors val, min, max, avg, sum, mintime, maxtime can be combined with a "@YYYYMMDDhhmm" specifier, which determines the point in time where the data should be taken from. This specifier also defines if data should be used on a per minute, per hour, per day, per month or per year resolution. To get data in a per minute resolution the specifier needs to define the point in time down to the minute. Example: "min@201512190900" selects minimum data from December 19, 2015 at 09:00 (on a per minute base), while "min@2015121909" selects minimum data from December 19, 2015 09:00 until 9:59 (on a per hour base). This is how the specifier works:

• @YYYY selects data for the specified year. Example: Using "[th0temp-min@2015]" in a template will report minimum outdoor temperature of 2015.
• @YYYYMM selects data for the specified month. Example: Using "[wind0wind-max@201509]" in a template will report maximum wind speed (gust) of September 2015.
• @YYYYMMDD selects data for the specified day. Example: Using "[rain0total-sum@20151031]" in a template will report total rainfall on October 31, 2015.
• @YYYYMMDDhh selects data for the specified hour. Example: Using "[uv0index-avg@2015110316]" in a template will report average UV index on November 3, 2015 between 16:00 and 16:59.
• @YYYYMMDDhhmm selects data for the specified minute. Example: Using "[thb0seapress-val@201512251200]" in a template will report sealevel pressure on Christmas noon, 2015 at 12:00.