Translations:Templates/16/en

System Variables

Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are:

• mac: Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
• swversion: Meteobridge version string (example: "1.1")
• buildnum: build number as integer (example: 1673)
• platform: string that specifies hw platform (example: "TL-MR3020")
• station: string that specifies selected weather station (example: "WMR-200")
• stationnum: integer that specifies selected weather station (example: 49)
• language: language used on Meteobridge's web interface (example: "English")
• timezone: defined timezone (example: "Europe/Berlin")
• latitude: latitude as float (example: 53.875120)
• longitude: longitude as float (example: 9.885357)
• uptime: uptime of Meteobridge in seconds
• cpuload1m, cpuload5m, cpuload15m shows average cpu load during last 1, 5, 15 minutes
• ip: IP address
• lanip: IP address on the LAN port (if connected)
• wlanip: IP address of the WLAN (if connected)
• lastdata: seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
• lastgooddata: seconds passed since last piece of meaningful sensor data recorded, returns -1 if no sensor data recorded so far
• solarmax: maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
• lunarage: days passes since new moon as integer (example: 28)
• lunarpercent: lunarphase given as percentage from 0% (new moon) to 100% (full moon)
• lunarsegment: lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
• daylength: length of day (example: "11:28")
• daylengthmin: length of shortest day of the year
• daylengthmax: length of longest day of the year
• civildaylength: alternative method for day length computation (example: "12:38")
• civildaylengthmin: length of shortest day of the year according to civil day length computation
• civildaylengthmax: length of longest day of the year according to civil day length computation
• nauticaldaylength: alternative method for day length computation (example: "14:00")
• nauticaldaylengthmin: length of shortest day of the year according to nautical day length computation
• nauticaldaylengthmax: length of longest day of the year according to nautical day length computation
• sunrise: returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
• sunset: returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
• civilsunrise, civilsunset, nauticalsunrise, nauticalsunset: alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
• daynightflag: returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
• isday: returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
• isnight: returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
• moonrise: time of moonrise in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
• moonset: time of moonset in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
• graphA: returns URL of the user's Meteoplug chart "*instruments-black"
• graphB: returns URL of the user's Meteoplug chart "*instruments-black-imp"
• graphC: returns URL of the user's Meteoplug chart "*iphone-black"
• graphD: returns URL of the user's Meteoplug chart "*iphone-black-imp"
• graphE: returns URL of the user's Meteoplug chart "*iphone-tw-2d"
• graphF: returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
• graphG: returns URL of the user's Meteoplug chart "*iphone-pr-2d"
• graphH: returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"