Difference between revisions of "Translations:Templates/16/en"

Revision as of 01:19, 31 July 2017

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Templates)

==System Variables==
Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are:
* '''mac''': Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
* '''swversion''': Meteobridge version string (example: "1.1")
* '''buildnum''': build number as integer (example: 1673)
* '''platform''': string that specifies hw platform (example: "TL-MR3020")
* '''station''': string that specifies selected weather station (example: "WMR-200")
* '''stationnum''': integer that specifies selected weather station (example: 49)
* '''language''': language used on Meteobridge's web interface (example: "English")
* '''timezone''': defined timezone (example: "Europe/Berlin")
* '''latitude''': latitude as float (example: 53.875120)
* '''longitude''': longitude as float (example: 9.885357)
* '''uptime''': uptime of Meteobridge in seconds
* '''cpuload1m''', '''cpuload5m''', '''cpuload15m''' shows average cpu load during last 1, 5, 15 minutes
* '''ip''': IP address
* '''lanip''': IP address on the LAN port (if connected)
* '''wlanip''': IP address of the WLAN (if connected)
* '''lastdata''': seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
* '''lastgooddata''': seconds passed since last piece of meaningful sensor data recorded, returns -1 if no sensor data recorded so far
* '''solarmax''': maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
* '''lunarage''': days passes since new moon as integer (example: 28)
* '''lunarpercent''': lunarphase given as percentage from 0% (new moon) to 100% (full moon)
* '''lunarsegment''': lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
* '''daylength''': length of day (example: "11:28")
* '''daylengthmin''': length of shortest day of the year
* '''daylengthmax''': length of longest day of the year
* '''civildaylength''': alternative method for day length computation (example: "12:38")
* '''civildaylengthmin''': length of shortest day of the year according to civil day length computation
* '''civildaylengthmax''': length of longest day of the year according to civil day length computation
* '''nauticaldaylength''': alternative method for day length computation (example: "14:00")
* '''nauticaldaylengthmin''': length of shortest day of the year according to nautical day length computation
* '''nauticaldaylengthmax''': length of longest day of the year according to nautical day length computation
* '''sunrise''': returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
* '''sunset''': returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
* '''civilsunrise''', '''civilsunset''', '''nauticalsunrise''', '''nauticalsunset''': alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
* '''daynightflag''': returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
* '''isday''': returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
* '''isnight''': returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
* '''moonrise''': time of moonrise in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
* '''moonset''': time of moonset in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
* '''graphA''': returns URL of the user's Meteoplug chart "*instruments-black"
* '''graphB''': returns URL of the user's Meteoplug chart "*instruments-black-imp"
* '''graphC''': returns URL of the user's Meteoplug chart "*iphone-black"
* '''graphD''': returns URL of the user's Meteoplug chart "*iphone-black-imp"
* '''graphE''': returns URL of the user's Meteoplug chart "*iphone-tw-2d"
* '''graphF''': returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
* '''graphG''': returns URL of the user's Meteoplug chart "*iphone-pr-2d"
* '''graphH''': returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"

==System Variables==
Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are: 
* '''mac''': Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
* '''swversion''': Meteobridge version string (example: "1.1")
* '''buildnum''': build number as integer (example: 1673)
* '''platform''': string that specifies hw platform (example: "TL-MR3020")
* '''station''': string that specifies selected weather station (example: "WMR-200")
* '''stationnum''': integer that specifies selected weather station (example: 49)
* '''language''': language used on Meteobridge's web interface (example: "English")
* '''timezone''': defined timezone (example: "Europe/Berlin")
* '''latitude''': latitude as float (example: 53.875120)
* '''longitude''': longitude as float (example: 9.885357)
* '''uptime''': uptime of Meteobridge in seconds
* '''cpuload1m''', '''cpuload5m''', '''cpuload15m''' shows average cpu load during last 1, 5, 15 minutes
* '''ip''': IP address
* '''lanip''': IP address on the LAN port (if connected)
* '''wlanip''': IP address of the WLAN (if connected)
* '''lastdata''': seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
* '''lastgooddata''': seconds passed since last piece of meaningful sensor data recorded, returns -1 if no sensor data recorded so far
* '''solarmax''': maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
* '''lunarage''': days passes since new moon as integer (example: 28)
* '''lunarpercent''': lunarphase given as percentage from 0% (new moon) to 100% (full moon)
* '''lunarsegment''': lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
* '''daylength''': length of day (example: "11:28")
* '''daylengthmin''': length of shortest day of the year
* '''daylengthmax''': length of longest day of the year
* '''civildaylength''': alternative method for day length computation (example: "12:38")
* '''civildaylengthmin''': length of shortest day of the year according to civil day length computation
* '''civildaylengthmax''': length of longest day of the year according to civil day length computation
* '''nauticaldaylength''': alternative method for day length computation (example: "14:00")
* '''nauticaldaylengthmin''': length of shortest day of the year according to nautical day length computation
* '''nauticaldaylengthmax''': length of longest day of the year according to nautical day length computation
* '''sunrise''': returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
* '''sunset''': returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
* '''civilsunrise''', '''civilsunset''', '''nauticalsunrise''', '''nauticalsunset''': alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
* '''daynightflag''': returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
* '''isday''': returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
* '''isnight''': returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
* '''moonrise''': time of moonrise in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
* '''moonset''': time of moonset in local time. Can be converted to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
* '''graphA''': returns URL of the user's Meteoplug chart "*instruments-black"
* '''graphB''': returns URL of the user's Meteoplug chart "*instruments-black-imp"
* '''graphC''': returns URL of the user's Meteoplug chart "*iphone-black"
* '''graphD''': returns URL of the user's Meteoplug chart "*iphone-black-imp"
* '''graphE''': returns URL of the user's Meteoplug chart "*iphone-tw-2d"
* '''graphF''': returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
* '''graphG''': returns URL of the user's Meteoplug chart "*iphone-pr-2d"
* '''graphH''': returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"

Translation==System Variables==
Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are:
* '''mac''': Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
* '''swversion''': Meteobridge version string (example: "1.1")
* '''buildnum''': build number as integer (example: 1673)
* '''platform''': string that specifies hw platform (example: "TL-MR3020")
* '''station''': string that specifies selected weather station (expample: "WMR-200")
* '''stationnum''': integer that specifies selected weather station (expample: 49)
* '''language''': language used on Meteobridge's web interface (example: "English")
* '''timezone''': defined timezone (example: "Europe/Berlin")
* '''latitude''': latitude as float (example: 53.875120)
* '''longitude''': longitude as float (example: 9.885357)
* '''uptime''': uptime of Meteobridge in seconds
* '''cpuload1m''', '''cpuload5m''', '''cpuload15m''' shows average cpu load during last 1, 5, 15 minutes
* '''ip''': IP address
* '''lanip''': IP address on the LAN port (if connected)
* '''wlanip''': IP address of the WLAN (if connected)
* '''lastdata''': seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
* '''lastgooddata''': seconds passed since last piece of meaningfull sensor data recorded, returns -1 if no sensor data recorded so far
* '''solarmax''': maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
* '''lunarage''': days passes since new moon as integer (example: 28)
* '''lunarpercent''': lunarphase given as percentage from 0% (new moon) to 100% (full moon)
* '''lunarsegment''': lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
* '''daylength''': length of day (example: "11:28")
* '''civildaylength''': alternative method for daylength computation (example: "12:38")
* '''nauticaldaylength''': alternative method for daylength computation (example: "14:00")
* '''sunrise''': returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
* '''sunset''': returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
* '''civilsunrise''', '''civilsunset''', '''nauticalsunrise''', '''nauticalsunset''': alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
* '''daynightflag''': returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
* '''isday''': returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
* '''isnight''': returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
* '''moonrise''': time of moonrise in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
* '''moonset''': time of moonset in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
* '''graphA''': returns URL of the user's Meteoplug chart "*instruments-black"
* '''graphB''': returns URL of the user's Meteoplug chart "*instruments-black-imp"
* '''graphC''': returns URL of the user's Meteoplug chart "*iphone-black"
* '''graphD''': returns URL of the user's Meteoplug chart "*iphone-black-imp"
* '''graphE''': returns URL of the user's Meteoplug chart "*iphone-tw-2d"
* '''graphF''': returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
* '''graphG''': returns URL of the user's Meteoplug chart "*iphone-pr-2d"
* '''graphH''': returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"

System Variables

Meteobridge provides some additional variables that tell details not directly related to weather conditions. Sensor name is "mbsystem", defined selectors are:

mac: Meteobridge MAC hardware address (example: "40:01:FE:23:12:A8")
swversion: Meteobridge version string (example: "1.1")
buildnum: build number as integer (example: 1673)
platform: string that specifies hw platform (example: "TL-MR3020")
station: string that specifies selected weather station (expample: "WMR-200")
stationnum: integer that specifies selected weather station (expample: 49)
language: language used on Meteobridge's web interface (example: "English")
timezone: defined timezone (example: "Europe/Berlin")
latitude: latitude as float (example: 53.875120)
longitude: longitude as float (example: 9.885357)
uptime: uptime of Meteobridge in seconds
cpuload1m, cpuload5m, cpuload15m shows average cpu load during last 1, 5, 15 minutes
ip: IP address
lanip: IP address on the LAN port (if connected)
wlanip: IP address of the WLAN (if connected)
lastdata: seconds passed since last piece of data received from weather station, returns -1 if no data received. Does not distinguish between useful and useless garbage data
lastgooddata: seconds passed since last piece of meaningfull sensor data recorded, returns -1 if no sensor data recorded so far
solarmax: maximum possible solar radiation on that day at that point of the earth. Needs latitude and longitude set and pressure data available.
lunarage: days passes since new moon as integer (example: 28)
lunarpercent: lunarphase given as percentage from 0% (new moon) to 100% (full moon)
lunarsegment: lunarphase segment as integer (0 = new moon, 1-3 = growing moon: quarter, half, three quarters, 4 = full moon, 5-7 = shrinking moon: three quarter, half, quarter)
daylength: length of day (example: "11:28")
civildaylength: alternative method for daylength computation (example: "12:38")
nauticaldaylength: alternative method for daylength computation (example: "14:00")
sunrise: returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
sunset: returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
civilsunrise, civilsunset, nauticalsunrise, nauticalsunset: alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
daynightflag: returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
isday: returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
isnight: returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
moonrise: time of moonrise in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
moonset: time of moonset in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")
graphA: returns URL of the user's Meteoplug chart "*instruments-black"
graphB: returns URL of the user's Meteoplug chart "*instruments-black-imp"
graphC: returns URL of the user's Meteoplug chart "*iphone-black"
graphD: returns URL of the user's Meteoplug chart "*iphone-black-imp"
graphE: returns URL of the user's Meteoplug chart "*iphone-tw-2d"
graphF: returns URL of the user's Meteoplug chart "*iphone-tw-2d-imp"
graphG: returns URL of the user's Meteoplug chart "*iphone-pr-2d"
graphH: returns URL of the user's Meteoplug chart "*iphone-pr-2d-imp"

Difference between revisions of "Translations:Templates/16/en"

Revision as of 01:19, 31 July 2017

System Variables

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Meteoplug Reference

Links

Tools

@@ Line 25: / Line 25: @@
 * '''civildaylength''': alternative method for daylength computation (example: "12:38")
 * '''nauticaldaylength''': alternative method for daylength computation (example: "14:00")
-* '''sunrise''': returns time of sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
+* '''sunrise''': returns time of astronomical sunrise in local time. Can be converted to UTC by applying "=utc" to the variable (example: "06:47", resp. "05:47") or can be converted to 12h time mode by applying "=apm" (example: "8:45AM").
-* '''sunset''': returns time of sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
+* '''sunset''': returns time of astronomical sunset in local time. Can be converted to UTC by applying "=utc" to the variable (example: "18:15", resp. "17:15") or can be converted to 12h time mode by applying "=apm" (example: "12:45AM").
 * '''civilsunrise''', '''civilsunset''', '''nauticalsunrise''', '''nauticalsunset''': alternative computations for sunset and sunrise. These can also be converted to UTC ("=utc") or AM/PM ("=apm") as "sunrise and sunset".
-* '''daynightflag''': returns "D" when there is daylight, otherwise "N".
+* '''daynightflag''': returns "D" when there is daylight, otherwise "N" (civil sunrise/sunset is used as reference).
-* '''isday''': returns "1" when there is daylight, otherwise "0".
+* '''isday''': returns "1" when there is daylight, otherwise "0" (civil sunrise/sunset is used as reference).
-* '''isnight''': returns "0" when there is daylight, otherwise "1".
+* '''isnight''': returns "0" when there is daylight, otherwise "1" (civil sunrise/sunset is used as reference).
 * '''moonrise''': time of moonrise in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonrise time, therefore, variable can be non-existent on certain days (example: "05:46", resp. "04:46")
 * '''moonset''': time of moonset in local time. Can be converterd to UTC or AP/PM notation by applying "=utc" resp. "=apm" to the variable. Please notice that not every day has a moonset time, therefore, variable can be non-existent on certain days (example: "17:00", resp. "16:00")